Wandy Wireless solutions

Wandy® M211p - High Speed Point-to-Point Wireless Bridges at 5GHz up to 5 Km

The B211p is designed for delivering high-speed point-to-point connectivity, with network management and traffic shaping. Easily bridging the gap between multiple communication sites. An enclosure with integrated antenna shows outstanding performance in the longer communication distance setups. Supplying the power and Ethernet connectivity concurrently via a single Ethernet cable, the Power Over Ethernet (POE) technology makes quick outdoor installation fairly easy.

Processor	Memory	Storage	Ethernet interfaces	Radio card	Case (mm)	Approx. throughput	Max conc. users	Power Supply	Typical use
Mips 300Mhz	64Mb	64Mb	1	1	22522555	~23Mbit	100	18 volt ext	Managed P2P

specifications:

Link Distance	Full speed up to 5 Km (with clear line of sight) **
Frequency range	5180 – 5825 MHz (EU & US channels)
Standard	802.11a 802.11h
Channels	11 non overlapping
Airspeed	6, 9, 12, 18, 24, 36, 48, 54Mbps
Radio cards	Radio cards can be selected from a wide range. Output power an receiver sensitivity depends greatly on te cards used; typical figures are: Receive sensitivity: -75dBm @ 54Mbps, -92dBm @ 6 Mbps Output power: 20 dBm @ 54Mbps 30 dBm @ 6 Mbps adjustable per speed and frequency
Antenna	Embedded 20 dBi gain Please keep in mind that not alle settings are leagal for local regulations! In this type of professional equipment it is your own responsibility to set your equipment according to regulations. (this also means it at your own risk to not keep to the local regulations)
Horizontal beamwidth	11 degrees
Vertical beamwidth	11 degrees
Polarization	Vertical or Horizontal
Maximum throughput	~23Mbit/s effective throughput* Speed depends on s/w configuration.
Power connection	POE Injector 100V/240 V input DC 18V/1A output
Ethernet connection	10/100Mbit BaseT (RJ45)
Antenna connection	Standard Internal
Dimensions	225 (H) * 225 (W) * 55 (D) mm
Weight	2 Kg including cable
Crossover cable	1 meter UTP cable
Operating temperature	-20 ºC +65 ºC
Installation material	Wall mount Pole mount 20 mm till 95 mm
** Range specifications should be used as guidelines only. Range depends on a variety of factors including antenna alignment, RF signal reflection, and interference, and might differ quite significantly between different environments.

Seamless integration
All modules are based on international standard RFC’s and therefore flexibility and excellent cooperation in any network environment are guaranteed.

Bandwidth manager
Data bandwidth management (classfull queueing) per IP / protocol / subnet / port / firewall mark; HTB, PCQ, RED, SFQ, byte limited queue, packet limited queue; hierarchical limitation, CIR, MIR, contention ratios, dynamic client rate equalizing (PCQ).
Again with the Bandwidth management module, the way’s to manage traffic are excellent. Not only bandwidth can be managed per subscriber, but also per protocol or service on the Internet. For example subscriber misuse via Bittorrent or Kazak can be put to a minimum or even stopped. On the other hand services like Voice or Video over IP can be given a fixed bandwidth and a higher priority. This guaranties real Quality of Service to (paying) subscribers on important services in the network, while not denying less important services (like the mentioned P2P activities) for other users.

WinBox management
It’s Operating system supports controlled access to networks networks in a very flexible way. The Wandy Station seamlessly intergrades in multi vendor networks. All modules are RFC compliant and therefore the Wandy Station guaranties flexibility and excellent cooperation in any network environment. To control the Wandy Station a Windows based System Management program is provided, WinBox. This program is a part of the system and comes free of charge with all Wandy Station products.
The WinBox system management program enables you to manage the HotSpot from anywhere over the world. All is needed is an Internet connection.
WinBox connects over a secured tunnel to the Wandy Station. In WinBox you will find that the Operating System can be configured in a very comfortable manner.

Support
Any network engineer with some knowledge about routing and switching can operate and configure a Wandy Station within a few day’s. Off cause if additional support is needed we gladly help you on your way. The first year support by mail, phone ore remote login on all Wandy Stations is free of charge.

The Wandy kit contains:		The Wandy GL unit + Stainless steel bracket
	POE inserter unit	Power adapter	1,5 meter crosscable
	Pole and wall mounting equipment	Power cable

Exploded view and detailed parts explaination of the Wandy unit: